4.2.1.4 Packet Tracer – Configuring Static Frame Relay Maps (100% Completed + Download)

This post was made because I was not present during lab work on campus.

In this activity, you will configure two static Frame Relay maps. Although the LMI type is autosensed on the routers, you will statically assign the type by manually configuring the LMI.

Download 100% 4.2.1.4 Packet Tracer – Configuring Static Frame Relay Maps

Command list :

R1

enable
config terminal
interface Serial0/0/0
ip address 10.1.1.1 255.255.255.0
encapsulation frame-relay
frame-relay map ip 10.1.1.3 103 broadcast
frame-relay map ip 10.1.1.2 102 broadcast
frame-relay lmi-type ansi

R2

enable
config terminal
interface Serial0/0/0
ip address 10.1.1.1 255.255.255.0
encapsulation frame-relay
frame-relay map ip 10.1.1.1 201 broadcast
frame-relay map ip 10.1.1.3 203 broadcast
frame-relay lmi-type ansi

R3

enable
config terminal
interface Serial0/0/0
ip address 10.1.1.1 255.255.255.0
encapsulation frame-relay
frame-relay map ip 10.1.1.2 302 broadcast
frame-relay map ip 10.1.1.1 301 broadcast
frame-relay lmi-type ansi